Insulated Metal Soil
Probe
Designed for sand, loose, or wet soil, the Mighty Probe(tm) Lite is
a light duty insulated soil probe. The Mighty Probe(tm) Lite
retains the same electrical protection of the Mighty Probe(tm) while featuring a thin
lightweight stainless steel shaft which won't rust and resists bends. For heavy duty
use, purchase a Mighty Probe(tm).The Mighty
Probe(tm) Lite
is to be used for secondary protection and is not intended to replace the
user's personal protective equipment.
The Mighty Probe(tm) Lite provides
increased protection against electrical shock resulting from incidental contact with
energized lines. As with all quality tools, it should be used correctly and under
proper conditions.
The Mighty Probe(tm) Lite has
been tested to 50,000 volts by an independent testing laboratory following ASTM F711-89
testing procedures. Additionally, it has been tested by the commercial laboratory
services of a major utility company. (Both dry and 48hr. water soak to 45,000 volts.)
IMPORTANT: The following lengths
include a 6" high-strength isolator. Therefore the 48" Mighty Probe(tm) Lite allows you to probe
42" deep (48" overall - 6" isolator = 42" rod).
| Part No. |
Length |
Cost |
| MPL42 |
42" |
$70.00 |
| MPL48 |
48" |
$70.00 |
FEATURES:
Grips:
- Bright color, easy to see
- Comfortable, smooth
- Durable vinyl softens impact
Handle:
- Sturdy 1" x 11" steel tube for light weight
- Light enough for one hand use
- Large enough to grip with both hands even while wearing
gloves
Isolator:
- High strength reinforced composite
- Molded to the handle for a secure connection
- Special alloy threaded insert
Shaft:
- High quality stainless steel shaft which is flexible and
resists bending.
- Small diameter for easy penetration in sand, loose or wet
soils
- Handle and shaft threaded for secure connection and ease of
replacement
Tip:
- Due to small diameter of shaft, a tip is not required
SAFETY NOTES:
- Always thoroughly inspect your Mighty
Probe(tm) Lite before each use.
- Always keep your Mighty
Probe(tm) Lite clean, dry and free of surface contamination to
maintain insulating properties of the Isolator.
- Always de-energize power sources
prior to using the Mighty Probe(tm) Lite
- Never allow bodily contact with the
uninsulated portions of the tool if there is any chance that the probe will make contact
with an energized source.
- To insure operator safety, be sure to follow OSHA
regulations!
Mighty Probe Patent Number 5,487,432 |
 |